Images are conceptual depictions of the cover design and are not photographs of your exact machine or the final sewn pattern.
2000 Caterpillar D4C Bear Armor Seat Cover
- Class
- Heavy Equipment
- Type
- Bulldozer
- Year
- 2000
- Make
- Caterpillar
- Model
- D4C
$459.00USD
Made to order · available to order
Made to order. Our manufacturer targets completing production within 24 hours of your order; shipping time is additional.
Also available as 2000 Caterpillar D4C Bear Shield Seat Cover — the rugged core tier.
Bear Armor construction
Our higher-protection option
Bear Armor is the maximum-protection build in the BearSeats line. It is made with a dense woven face, layered wear zones in the places a working seat takes the most abuse, and reinforced edges with protected piping.
- Dense woven face — a black, dense-looking technical weave across the seating surface.
- Layered wear zones — deep-forest overlay panels at the lower back, cushion edge, and bolsters.
- Reinforced edges — protected piping and structured seam channels with copper bar-tacks at stress points.
- Hardware clearance — patterned to keep seat controls, belts, and adjusters usable.
When to choose Bear Armor
Choose Bear Armor for seats that see constant in-and-out use, tools and gear on the cushion, and long shifts. It is our higher-protection option and looks visibly more layered than Bear Shield.
Construction descriptions reflect the current design. Performance ratings, material specifications, and comparative test results are published only after BearSeats completes documented testing.
Fit details
- Approved fitment
- 2000 Caterpillar D4C
- Equipment class
- Heavy Equipment
- Equipment type
- Bulldozer
- Protection tier
- Bear Armor
- Production
- Made to order
- Offer ID / MPN
- BAR-BS-001941
Installation
Installation and support
- Park the machine, set the brake, and remove tools, gear, and cushions from the seat.
- Fit the backrest section first, working the fitted edge over the top of the seat back and down each side.
- Fit the cushion section, aligning the hardware clearances with belts, switches, and adjusters before pulling the edges tight.
- Secure the fasteners and confirm every control, belt, and seat switch works exactly as it did before.
Questions about a seat variant, armrest configuration, or an aftermarket seat? Read the installation and support guide or contact BearSeats with your fitment ID.
Heavy Equipment seat cover questions
Is this cover approved for my Caterpillar D4C?
Yes. The 2000 Caterpillar D4C is on the BearSeats approved fitment list for both Bear Shield and Bear Armor. Each page on this site corresponds to one approved year, make, and model, and the fitment ID travels with your order so production builds the correct pattern.
How long does production take?
Made to order. Our manufacturer targets completing production within 24 hours of your order; shipping time is additional. Shipping options and transit estimates are shown at checkout once shipping is configured.
Will it fit a suspension seat with a seat switch and lap belt?
Heavy-equipment patterns are made for operator suspension seats and are cut with clearance for seat switches, lap-belt anchors, and suspension adjusters. Never cover or disable an operator-presence switch.
Is the cover suitable for open cabs and ROPS machines?
Yes. The covers are meant for open and enclosed operator stations. Keep the cover snug so it cannot interfere with controls or move under the operator.
What is the difference between Bear Shield and Bear Armor?
Bear Shield is the rugged woven core tier with simpler construction. Bear Armor is the higher-protection build with layered wear zones and reinforced edges. Both are made to order for this exact fitment. Compare Shield and Armor.
More Caterpillar covers
All Caterpillar D4C model years · All Caterpillar heavy equipment covers · All heavy equipment